|
- Operating software
Every operating program in the unit is
controlled with mutual links and communications to prevent every possible error, so it
introduces the maximum safety, such as input voltage warning, reverse polarity protection
and Lithium cell-count input error warning.
- High-power and high-performance circuit
BC6-10 employs the circuit that has maximum
output power of 200 Watts. As a result, it can charge or discharge up to 18 cells of
NiCd/NiMH and 6 series of Lithium batteries with maximum current of 10A. Furthermore, the
cooling system is so efficient that can hold such a power without any trouble of running
the circuit or the operating program.
- Individual voltage
balancer for Lithium batteries inside
BC6-10 has an
individual-cell-voltage balancer inside. So it does not need any balancer separately when
charging Lithium batteries (LiIo/LiPo/LiFe) for cell voltage balancing.
** When the 'Balance
charge' mode being performed, the balancing adapter should be connected to the
balancing tab of battery pack, as well as the charger's charging lead should be connected
to the output of battery pack.
And also, please pay
attention to the polarity of the battery pack's output which goes to the charger's
output. If it is reversed, the short-circuit can be happened on the battery pack.
- Accept various types of
Lithium battery
BC6-10 can accept three types of Lithium batteries -
LiIo, LiPo and LiFe (A123). They have different characteristics by their chemistry. You
can select any one of them that you are going to process before the job.
- Lithium battery 'Fast' and
'Storage' mode
You can charge Lithium
battery for special purposes. 'Fast' charge reduces the charging time of Lithium battery
and 'Storage mode controls the final voltage of the battery to be suit for long time
storage.
- Data store/load
For users convenience it can
store maximum 10 data of different batteries. You can establish the data contains program
setting of the battery to charge or discharge continually. These data can be called out at
any time you need and the process can be executed without program setting.
- Cyclic
charging/discharging
Perform 1 to 5 cycles of
charge>discharge or discharge>charge continually for battery refreshing and
balancing.
- PC based analysis using
USB communication
For technical expert, BC6-10
offers an optional PC based program can analysis the characteristic of the battery by the
USB port. It shows a graph of voltage, current, capacity and temperature curves. It also
shows the individual voltage of each cell in the Lithium battery pack.
- Back-light LCD screen
You can adjust the brightness of
LCD display
- Robust outer aluminum case
High-quality aluminum case is
durable and very efficient to cool out the internal heat with a built in cooling fan.
|